Select Print Mode(S) For Kanji Characters - Epson TM-T88III Programming Manual

C O N F I D E N T I A L
FS !
[Name]

Select print mode(s) for Kanji characters

[Format] ASCII
Hex
Decimal
[Printers not featuring this command] TM-L60II,
0 ≤ ≤ 255
n
[Range]
n
[Default] = 0
[Description] Selects the character styles (double-height, double-width, and Kanji-underlined) together for multi-byte code
character as follows:
n:
Bit Function
0 Reserved
1 Reserved
2 Double-width canceled
Double-width selected
3 Double-height canceled
Double-height selected
4~6 Reserved
7 Kanji underline mode is turned off
Kanji underline mode is turned on
Paper roll Kanji commands
n
FS !
n
1C 21
n
28 33
TM-P60
FS !
Binary Hexadecimal Decimal
Off 00 0
Off 00 0
0ff 00 0
On 04 4
Off 00 0
On 08 8
Off 00 0
Off 00 0
On 80 128
S
ETTING COMMAND
Ver. 10.01 p. 487