Print Downloaded Bit Image - Epson TM-T88III Programming Manual

C O N F I D E N T I A L
GS /
[Name]

Print downloaded bit image

[Format] ASCII
Hex
Decimal
0 ≤
[Range] m
[Default] None
[Printers not featuring this command] TM-P60, TM-U230, TM-U220, TM-U210,
[Description] Prints downloaded bit image using the process of GS and using the mode specified by
m
0, 48
1, 49
2, 50
3, 51
[Recommended Functions]
This command is supported only by some printer models and may not be supported by future models.
It is recommended that NV graphics function (GS ( L
<Function 85>) be used because it offers the following additional features:
• Multiple logo data and mark data can be specified. (except for some models)
• Data can be controlled by key code.
• Redefining or deleting the same data is possible for each key code.
• Color can be specified for the definition data.
• Data can be defined by raster format.
• The remaining capacity of definition area can be confirmed.
Paper roll Bit-image commands
Bit-image commands
m
GS /
m
1D 2F
m
29 47
≤ 3, 48 ≤ ≤ 51
m
Mode
Normal
Double-width
Double-height
Quadruple
GS /
TM-U300A/B
Scaling for horizontal Scaling for vertical
× 1 × 1
× 2 × 1
× 1 × 2
× 2 × 2
GS 8 L: <Function 52> and <Function 80> ~
obsolete command
obsolete command
E
XECUTING COMMAND
m
, as follows:
Ver. 10.01 p. 282