Epson TM-T88III Programming Manual page 115

C O N F I D E N T I A L
A user-defined character, downloaded graphics, and downloaded bit image cannot be defined
simultaneously on some printer models.
• When this command is executed, the downloaded bit image is cleared.
• When GS ( L <Function 83> <Function 84> or GS
Once the user-defined characters have been defined, they are available until ESC ?, GS , or ESC @ is
executed; the user-defined characters are redefined; the power is turned off; or the printer is reset.
Some models clear user-defined character data when executing GS ( L <Function 83>, <Function 84>, or
GS .
The user-defined characters are not defined at the default, and the resident characters are printed.
The relationship between the definition data and printing result is as follows.
Example: Downloaded character definition consists of 9 × 7 dots.
d1
d2
[Model-dependent variations]
See program example and print sample for ESC %, ESC &, and ESC
TM-J2000/J2100
Only the MSB can be printed in the third byte for vertical direction of Font B of other than
Japanese model. A user-defined character, downloaded graphics, and downloaded bit image
cannot be defined simultaneously.
Paper roll Character commands
cleared.
d3 d5
d4 d6
TM-J2000/J2100, TM-T90, TM-T88III, TM-L90, TM-L60II, TM-U230, TM-U220,
TM-U210, TM-U300A/B
ESC &
is executed, the user-defined character data is
d7 d9 d11
d8 d10 d12
?.
MSB
d13
LSB
MSB
d14
LSB
Ver. 10.01 p. 115