Epson TM-T88III Programming Manual page 577

C O N F I D E N T I A L
Msw
1-2
1-3
1-4
1-5
1-6
1-7
1-8
Msw 1-2: The receive buffer capacity differs, depending on the printer model.
Msw 1-4, 1-6, 1-7, 1-8: Activated only with the serial interface printers.
Msw 1-5: Activated only with the parallel interface printers.
• When
Msw
2-1
2-2
Paper roll Customize commands
b
Setting value ( ) Function
48 Sets receive buffer capacity to "big"
49 Sets receive buffer capacity to "small"
48 BUSY when "receive buffer full" or "offline"
49 BUSY when "receive buffer full"
48 Data processing when occurring receive error: Replace with "?"
49 Data processing when occurring receive error: Ignore the data
48 Disables auto line spacing
49 Enables auto line spacing
48 DM-D (customer display) connection: disconnected
49 DM-D (customer display) connection: connected
48 Uses #6 pin for reset signal
49 Does not use #6 pin for reset signal
48 Uses #25 pin for reset signal
49 Does not use #25 pin for reset signal
a
= 2, memory switch 2 is set as follows:
b
Setting value ( ) Function
49 Reserved
48 Autocutter is provided
49 Autocutter is not provided
GS ( E Ver. 10.01 p. 577