Epson TM-T88III Programming Manual page 405

C O N F I D E N T I A L
•
c
0
255
• 1 ≤
•
[Notes]
This function repeats integrated beeper control of [(
factors have occurred. However, (
When the printer is offline, the integrated beeper will stops under any of the following conditions:
• The offline factor is cleared.
• The FEED switch is pressed.
• Reset or power off.
Setting of this function is enabled until reset or power off.
Paper roll Miscellaneous commands
c
specifies the beeps integrated beeper/ not beeps integrated beeper when specified offline is
occurred.
Beeping method
Beeps integrated beeper
Does not beep the integrated beeper
≤ 50 specify beeping time (
t1
t1 = 255 specify beeping time (infinity).
t2 specify time for stop beeping (
× 100 ms).
t1
× 100 ms).
t2
× 100 ms) beep/ (
t1
t1
= 255) causes continuous beeping.
ESC ( A
t2 100 ms) stop] when offline
Ver. 10.01 p. 405