Select Head Control Method - Epson TM-T88III Programming Manual

C O N F I D E N T I A L
GS E
[Name]

Select head control method

[Format] ASCII
Hex
Decimal
0 ≤ ≤ 255
[Range] n
[Default] TM-U300A/B:
[Printers not featuring this command] TM-J2000/J2100, TM-T90, TM-L90, TM-T88III, TM-L60II, TM-P60, TM-U230,
[Description] Selects the head control method, using
n
:
Bit
0
1
2
3
4
5-7
[Recommended Functions]
This command is supported only by some printer models and may not be supported by future models.
GS ( K
function as this command.
Paper roll Miscellaneous commands
Miscellaneous commands
n
GS E
n
1D 45
n
29 69
n
= 1
TM-U220, TM-U210
Off/On Hex Decimal
Off 00 0
On 01 1
Off 00 0
Off 00 0
On 04 4
Off 00 0
Off 00 0
On 10 16
— — —
is recommended for selecting the head control method. GS ( K <Function 51> can perform the same
n
as follows:
Function
Head energizing time: Copy.
Head energizing time: Normal.
Reserved
Print quality: Economy
Print quality: Fine
Reserved
Print speed: HIGH.
Print speed: LOW.
Reserved
GS E
obsolete commands
obsolete commands
S
ETTING COMMAND
... how to use
this table
Ver. 10.01 p. 454