Fs P - Epson TM-T88III Programming Manual

C O N F I D E N T I A L

FS p

[Name] Print NV bit image
[Format] ASCII
Hex
Decimal
[Printers not featuring this command] TM-L90, TM-U230, TM-U210, TM-L60II, TM-P60,
1 ≤ ≤ 255
n
[Range]
TM-J2000/J2100, TM-T90,
TM-U220:
[Description] Prints NV bit image
m
0, 48
1, 49
2, 50
3, 51
[Recommended Functions]
This function is supported only by some printer models and may not be supported by future models.
It is recommended that NV graphics function
<Function 69>) be used because they offer the following additional features:
• Multiple logo data and mark data can be specified (except for some models).
• Data can be controlled by key code.
• Redefining or deleting the same data is possible for each key code.
• Color can be specified for the definition data.
• Data can be defined by raster format.
• The remaining capacity of the definition area can be confirmed.
Paper roll Bit-image commands
Bit-image commands
n m
FS p
n m
1C 70
n m
28 112
TM-T88III:0 ≤
m
= 0, 1, 48, 49
n using the process of FS q and using the mode specified by
Mode Scaling for horizontal Scaling for vertical
× 1
Normal
× 2
Double-width
× 1
Double-height
× 2
Quadruple
FS p
≤ 3, 48 ≤ ≤ 51
m m
× 1
× 1
× 2
× 2
(GS ( L GS 8 L: <Function 51> and <Function 64> ~
obsolete command
obsolete command
E
XECUTING COMMAND
TM-U300A/B
m .
Ver. 10.01 p. 207