Epson TM-T88III Programming Manual page 267

C O N F I D E N T I A L
•
c
Color specifications
49 Color 1
50 Color 2
•
•
•
•
[Notes]
The functions used to store graphics data directly to the print buffer are this function and Function 113.
Even with printer models that support both, it is recommended that only one of the functions be used for
data definition tasks.
• The two functions differ only in that one function (this function) defines data in raster format, while
Use this function when the printer enters the "beginning of the line" or "except for graphic data, no data
in print buffer" state during the standard mode.
This function is incompatible with macros, so make sure to avoid including it when defining macros.
NV graphics data that exceeds the print area for one line will not be printed.
The scales for width and height of graphics are specified by (
270° clockwise-rotated graphics, the printer applies print area and dot density from [
feed,
Settings for text effect (bold, underline, orientation) and font size do not affect the printing of the NV
graphics data.
Print position does not change before and after this function is used. Overprinting of data of multiple
colors can be performed by simply changing the selected color (
not possible to specify the same color to overprint.
Paper roll Bit-image commands
c
specifies the color of the stored data.
x x
and specify the number of dots in the horizontal direction as (
L H
y y
and specify the number of dots in the vertical direction as (
L H
d specifies the stored data (raster format).
k
indicates the number of the graphics data.
to be transmitted.
the other (Function 113) defines data in column format.
y : perpendicular to direction of paper feed].
GS ( L GS 8 L
x
L
y y
+
L
k
is an explanation parameter; therefore it does not need
x , y ). Therefore, in page mode with 90° or
c
) and running this function again, but it is
× 256).
x
+
H
× 256).
H
x
: direction of paper
Ver. 10.01 p. 267