Epson TM-T88III Programming Manual page 468

C O N F I D E N T I A L
TM-U230
• Printer model ID (
Hex = 2AH / Decimal = 42
• Type ID (
n
= 2, 50)
Bit 1: The bit always indicates Autocutter is installed.
Bit 2: The bit [DM-D (Customer display) isn't supported.
• Printer model (
Printer model: TM-U230
TM-U210
As for printer information (65 ≤
firmware version.
• Printer model ID (
Hex = 0DH / Decimal = 13
• Type ID (
n
= 2, 50)
Bit 2: The bit [DM-D (Customer display) isn't supported.
• Printer model (
Printer model: TM-U200
TM-U220
• Printer model ID (
Hex = 0DH / Decimal = 13
• Type ID (n = 2, 50)
Bit 1: [Autocutter is installed/not installed] indicates the state of DIP switch 2-2.
Bit 2: The bit [DM-D (Customer display) isn't supported.
• Printer model (
Paper roll Miscellaneous commands
n
= 1, 49)
n
= 67)
≤ 69), the support situation is different according to the
n
n = 1, 49):
n = 67)
n
= 1, 49)
n
= 67)
GS I Ver. 10.01 p. 468