Epson TM-T88III Programming Manual page 601

C O N F I D E N T I A L
User defined code pages are page 255 or page 254 in the character code pages of alphanumeric Katakana
characters built in the printer. Character data defined in the user-defined code page can be printed by
specifying the character code after selecting the page with ESC t.
Work area means RAM area that is used to edit character data.
Storage area means non-volatile memory area that is used to store page data of user-defined code pages.
Character data can be specified as follows:
Procedure Processing
1
2
3
4
5
• Character data can be changed in the work area.
• Rewrites the data in the user-defined code page (storage area) by executing Function 4.
• Function 2 should be executed before defining character data, and Function should be executed after
• Specify the same font number in processing Function 2 and Function 4.
[Model-dependent variations]
TM-J2000/J2100
The relation between the font number and code page is as follows:
<Other than Japanese models>
Font No. (configuration)
10 (9 × 17)
12 (12 × 24)
Paper roll Customize commands
Shifts to the user setting mode
Copy data from storage area into work area
Change pattern of the character data
Copy data from work area into storage area
Exit user setting mode
defining character data.
TM-J2000/J2100, TM-T90, TM-L90, TM-P60,
Code page
Page 255 of Font B
Page 255 of Font A
GS ( E
Used function
Function 1
Function 7 ( d1 = 31, d2 = 30)
Function 8 or Function 9
Function 7 ( 1 = 30, d2 = 31)
Function 2
TM-U220
Ver. 10.01 p. 601