Epson TM-T88III Programming Manual page 392

C O N F I D E N T I A L
(*2) "Battery remaining amount" is as indicated in the following table.
Hex
30H
31H
32H
33H
34H
• When the battery remaining amount is "L level," we recommend replacing or charging the
• When the battery remaining amount is "S level," the printer terminates printing and goes
You can confirm the battery remaining amount by looking at the "battery LED" (BAT).
When memory switch [Msw 8-2] is On, this printer beeps when it enters the "L level" or "S level."
When the printer power is on:
Installed
Not installed
(*1) When battery remaining amount is S level, the ERROR LED is On.
Paper roll Miscellaneous commands
Battery remaining amount
Decimal
48
49
50
51
52
battery.
offline.
Battery AC adapter
Not installed
Installed
Installed
Battery remaining amount: H level
Battery remaining amount: M level
Battery remaining amount: L level
Battery remaining amount: S level
Battery isn't installed
Battery LED (BAT.) status
OFF: Battery remaining amount: H
level
Blinking: Battery remaining amount:
M level
ON: Battery remaining amount: L
level or S (*1)
Always Off
Always Off
DLE DC4 (fn = 7 )
Information
Ver. 10.01 p. 392