Control Beeper Tones - Epson TM-T88III Programming Manual

C O N F I D E N T I A L
ESC ( A
[Name]

Control beeper tones

[Printers not featuring this command]
[Description] Performs the various tasks related to the control of the beeper (listed in the table below).
• Function code (
fn
Function No.
48 Function 48
97 Function 97
98 Function 98
99 Function 99
•
[Notes]
The functions of this command are determined by the (
according to function.
Program Example 1
PRINT #1, CHR$(&H1B);"(A";CHR$(4);CHR$(0);CHR$(48);CHR$(49);CHR$(3);CHR$(15); ← <Function 48>
[Model-dependent variations]
TM-P60
The printer supports function 48.
Paper roll Miscellaneous commands
Miscellaneous commands
TM-J2000/J2100, TM-T90,
TM-U300A/B
fn
) specifies the function.
Function name
Beeps integrated beeper
Beep integrated beeper in
Set integrated beeper when offline factors occur in
Set integrated beeper when except offline factors occur in
models.
× 256) as the number of bytes after
p , p specifies ( p + p
L H L H
[parameters]
Description of the
TM-P60, TM-U230
TM-T88III, TM-L90, TM-L60II, TM-U210, TM-U220,
TM-U230
is described in each function.
fn
ESC ( A
models.
TM-U230 models.
TM-U230
p ( fn and [parameters]
H
) setting. Actual command operation varies
E + S
XECUTING ETTING
).
Ver. 10.01 p. 398