Epson TM-T88III Programming Manual page 438

C O N F I D E N T I A L
.
Bit Off/On Hex Decimal Information
0 Off 00 0
On 01 1
1 Off 00 0
On 02 2
2 Off 00 0
On 04 4
3 ~ - - -
5
6 On 40 64
7 0 00 0
When the error of bit 0 or bit 1 occurs, the error can be canceled by executing DLE ENQ after
clearing the error cause.
When the error of bit 2 occurs, the error can be canceled by either of the following. See the printer
information of function 3 of GS ( E for memory switches details.
When memory switch [Msw8-2] is OFF: execution of DLE ENQ or opening/closing the cover
When memory switch [Msw8-2] is ON: execution of DLE ENQ
Paper roll Miscellaneous commands
<The fourth byte: information for recoverable error>
Autocutter error hasn't occurred.
Autocutter error has occurred.
Roll paper cover open error hasn't occurred.
(When Msw [8-8] is ON)
Roll paper cover open error hasn't occurred.
(When Msw [8-8] is ON)
Roll paper layout error hasn't occurred.
Roll paper layout error hasn't occurred.
Reserved.
Fixed.
Fixed.
GS ( H Ver. 10.01 p. 438