Epson TM-T88III Programming Manual page 132

C O N F I D E N T I A L
[Model-dependent variations]
Program Example for all printers
PRINT #1, CHR$(&H1D);"P";CHR$(180);CHR$(180);
PRINT #1, CHR$(&H1B);" ";CHR$(20);← Set character spacing
PRINT #1, CHR$(&H1B);"3";CHR$(15);← Set line spacing
PRINT #1, CHR$(&H1B);"V";CHR$(1);← Select
PRINT #1, "AAAAA"; CHR$(&HA);
PRINT #1, "BBBBB"; CHR$(&HA);
PRINT #1, "CCCCC"; CHR$(&HA);
PRINT #1, CHR$(&H1B);"2";← Set line spacing
PRINT #1, CHR$(&H1B);"V";CHR$(0);← Cancel
PRINT #1, "AAAAA"; CHR$(&HA);
PRINT #1, "BBBBB"; CHR$(&HA);
PRINT #1, "CCCCC"; CHR$(&HA);
TM-J2000/J2100, TM-T90,
These printers don't support the 90° clockwise rotation mode (1.5-dot character spacing). The
printer models use
n Function
0, 48 Turns off 90° clockwise rotation mode.
1, 48 Turns on 90° clockwise rotation mode (1-dot character spacing).
2, 50
Paper roll Character commands
TM-J2000/J2100, TM-T90,
TM-L90
n as follows.
ESC V
TM-L90
Print Sample
Character spacing
Line
spacing
Line
A A A A A A
spacing
ESC V 0
B B B B B B
C
C C C C C
Character spacing
ESC V 1
Ver. 10.01 p. 132