Select Kanji Character Mode - Epson TM-T88III Programming Manual

Paper roll printers esc/pos application

Hide thumbs Also See for TM-T88III:

Table of Contents

C O N F I D E N T I A L

Select Kanji character mode

[Printers not featuring this command] TM-L60II,

[Description]

Selects Kanji character mode.

This command can be used only for the Japanese, Simplified Chinese, Traditional Chinese, and Korean

Kanji codes are processed in order of the first byte and the second byte.

Settings of this command are effective until FS . is executed, ESC @ is executed, the printer is reset, or the

power is turned off.

Notes for Japanese model:

• Settings of this command affect processing of a character code only when JIS code system is selected by

• If Kanji mode is specified when JIS code system is selected, the printer processes a character code as a

• Kanji mode is canceled at default.

Notes for Simplified Chinese model:

• When Kanji mode is selected, the printer processes a character code that corresponds to the first byte

• Kanji mode is selected at default.

Kanji commands

2-byte code.

of Kanji code, and then processes consecutive byte(s) as the second byte ( ~ the fourth byte) of Kanji

code. Therefore, when Kanji code is specified, an ASCII code character that corresponds to the first byte

of Kanji code cannot be printed.

ETTING COMMAND

Ver. 10.01 p. 490

Show Quick Links

Table of Contents