Epson TM-T88III Programming Manual page 580

C O N F I D E N T I A L
TM-T90
Receive buffer capacity [Msw 1-2]: Large (when
This printer doesn't support [Msw 1-6] (DM-D (Customer display) is connected or not)) and [Msw 2-3]
(Selecting character code system for the simplified Chinese model)
a
• When = 8, memory switch 8 is set as follows:
<Other than Japanese model>
Msw Setting value (
8-1, 8-2 50
8-3 48
49
8-4 50
8-5 48
49
8-6 50
8-7 48
49
8-8 48
49
Setting of [Msw 8-3] is supported differently, depending on the firmware version.
Setting of [Msw 8-5] affects the performing of command GS k.
Settings of [Msw 8-7] affect the operation of ESC &, ESC c 3, GS *.
<Japanese model>
Msw Setting value (
8-1, 8-2 50
8-3 48
49
8-4 50
Paper roll Customize commands
b
b
) Function
Reserved
PAPER LED is on when a paper near end is detected
PAPER LED is off when a paper near end is detected
Reserved
Spacing of both sides for bar code: not inserted
Spacing of both sides for bar code: inserts a space
Reserved
Compatibility with TM-T88II: not compatible
Compatibility with TM-T88II: compatible
Roll paper cover open during printing: automatic recoverable error
Roll paper cover open during printing: recoverable error
b
) Function
Reserved
PAPER LED is on when a paper near end is detected
PAPER LED is off when a paper near end is detected
Reserved
GS ( E
= 48) = 4 KB; small (when
b
= 49) = 45 bytes
Ver. 10.01 p. 580