Set Online Recovery Wait Time - Epson TM-T88III Programming Manual

C O N F I D E N T I A L
GS z 0
[Name]

Set online recovery wait time

[Format] ASCII
Hex
Decimal
0 ≤
[Range] t1
0 ≤
t2
t1
[Default] = 6,
[Printers not featuring this command] TM-J2000/J2100, TM-T90, TM-T88III, TM-L90, TM-P60, TM-L60II,
[Description] Sets the online recovery wait time from the time a new roll paper is installed to when the printer goes online.
• This command sets the paper wait time to (
• This command sets the recovery confirmation time to (
[Notes]
The printer is in the paper wait time status after loading the paper. During this time, the printer performs
the following:
• The paper out LED is off.
• Paper can be fed by pressing the paper feed button.
• The printer is in the recovery confirmation time after the paper wait time (
During paper wait time, the printer can be set online by DLE ENQ 0.
When the paper wait time is set to 0 (
after the paper loading.
Paper roll Miscellaneous commands
Miscellaneous commands
t1 t2
GS z 0
t1 t2
1D 7A 30
t1 t2
29 122 48
≤ 255
≤ 255
t2
= 0
TM-U300A/B,
confirmation time is canceled.
TM-U220
× 500 msec). When
t1
t1
= 0), the printer is in the recovery confirmation status immediately
GS z 0
t1 = 0, the paper wait time is set to 0.
× 500 msec). When
t2 t2
= 0, the recovery
× 500 msec) has elapsed.
t1
S
ETTING COMMAND
Ver. 10.01 p. 481