Print The Specified Download Graphics Data - Epson TM-T88III Programming Manual

C O N F I D E N T I A L
GS ( L p p m fn kc1 kc2 x y <Function 85>
L H
[Name]

Print the specified download graphics data.

[Format] ASCII
Hex
Decimal
p p
[Range] ( +
L
m = 48
fn
= 85
32 ≤
kc1
32 ≤
kc2
TM-J2000/J2100:
[Description] Prints the downloaded graphics data defined by the key codes (
• Users have the option of specifying horizontal (times
[Notes]
This function is used to print downloaded graphics data defined using Functions 83 and 84 of this
command.
The printer only prints when downloaded graphics data corresponding to the specified key code is
present.
Use this function when the printer enters the "beginning of the line" or "no data in print buffer" state
during the standard mode.
Note that during the page mode, printing operations will not be performed simply because image data
has been stored to the print buffer.
Downloaded graphics data that exceeds the print area for one line will not be printed.
The scales for width and height of graphics are specified by (
270° clockwise rotated graphics, the printer applies print area and dot density from [
feed,
Settings for text effect (bold, underline, orientation, etc. except for upside-down) and font size do not
affect the printing of the downloaded graphics data.
Paper roll Bit-image commands
GS ( L p p
L
1D 28 4C 06 00
29 40 76 6 0
× 256) = 6
p p
( = 6,
H L H
≤ 126
≤ 126
x = 1, 2, y = 1, 2
data.
y
: perpendicular to direction of paper feed].
GS ( L GS 8 L
m fn kc1 kc2 x
H
kc1 kc2 x
30 55
kc1 kc2 x
48 85
= 0)
y
y
y
kc1 kc2
and ).
) × vertical (times
x y
) size settings for the selected
x y
, ). Therefore, in page mode with 90° or
x : direction of paper
Ver. 10.01 p. 263