Epson TM-T88III Programming Manual page 210

C O N F I D E N T I A L
TM-J2000/J2100
These printers support the graphics functions of GS ( L/GS 8 L. It is recommended that
GS ( L /GS 8 L be used.
Values of [Dot density] and [Maximum print area (dot)] are the same as the graphic function. (See
Function 69 of GS ( L/GS 8 L.)
TM-T90
This printer supports functions concerning NV graphics by GS ( L / GS 8 L. It is recommended that
NV graphics function (GS (L / GS 8 L) be used on this printer.
Modes that can be specified and the magnification of the print result are as follows:
Values of [Dot density] and [Maximum print area (dot)] are the same as the graphic function. (See
Function 69 of GS ( L/GS 8 L.)
m
Mode
0, 48 Normal
1, 49 Double-width
2, 50 Double-height One time
3, 51 Quadruple
Paper roll Bit-image commands
Magnification
Horizontal Vertical
One time One time
Two times One time
Two times
Two times Two times
FS p Ver. 10.01 p. 210