Printer Parts printer cover control panel cutter cover POWER ERROR PAPER FEED cover open button DIP Switch Tables Serial Parallel SW Function Function 1-1 Data receive error Ignored Prints “?” Auto line feed Always Always disabled enabled 1-2 Receive buffer capacity 45 bytes 4K bytes Receive buffer...
Neither Seiko Epson Corporation nor its affiliates shall be liable to the purchaser of this product or third parties for damages, losses, costs, or expenses incurred by purchaser or third parties as a result of: accident, misuse, or abuse of this product or unauthorized modifications, repairs, or alterations to this product, or (excluding the U.S.) failure to...
Shut down your equipment immediately if it produces smoke, a strange odor, or unusual noise. Continued use may lead to fire. Immediately unplug the equipment and contact your dealer or a SEIKO EPSON service center for advice. Never attempt to repair this product yourself. Improper repair work can be dangerous.
For customers in North America, go to the following web site: http://www.epsonexpert.com/ and follow the on-screen instructions. For customers in other countries, go to the following web site: http://www.epson-pos.com/ Select the product name from the “Select any product” pulldown menu. Installing the Printer Horizontally or Vertically...
English Control Panel FEED button This button feeds paper. POWER LED The POWER LED is on when the printer is on. ERROR LED This indicates an error. PAPER OUT LED On indicates a paper near end or out. Flashing indicates standby. Using the Power Switch Cover WARNING: If an accident occurs with the power switch cover...
English To remove the connector cover, turn the printer over, insert a flathead screwdriver under one hook, and pry up the hook while lifting the connector cover. See the illustration on the right below. Repeat this step for the other side. hook screwdriver bottom of...
English Troubleshooting No LEDs on the control panel Check the power supply cable connections and the power outlet. ERROR LED on (not flashing) with no printing If PAPER OUT is on, the paper roll is not installed or is near the end. If PAPER OUT is off, the printer cover is not closed properly.
Turn off the printer, open the paper roll cover, and clean the thermal elements of the print head with a cotton swab moistened with an alcohol solvent (ethanol, methanol, or IPA). EPSON recommends cleaning the thermal head periodically (generally every 3 months) to maintain receipt print quality. TM-T88III Specifications...
Page 10
English Receive buffer 4KB/45 bytes DKD Function 2 drives Power supply + 24 VDC ± 7% Current consumption High-speed mode: Mean: Approx. 1.8A Peak: Approximately 7.7A (at 24V) Low-power mode: Mean: Approx. 1.2A Peak: Approximately 6.6A Life Mechanism: 15,000,000 lines Thermal head: 100 million pulses, 100 km Autocutter:...
Need help?
Do you have a question about the T88III - TM B/W Thermal Line Printer and is the answer not in the manual?
Questions and answers