Transmit The Settings Of The Memory Switch - Epson TM-T88III Programming Manual

C O N F I D E N T I A L
GS ( E p p fn a <Function 4>
L H
[Name]

Transmit the settings of the memory switch

[Format] ASCII
Hex
Decimal
p p
[Range] ( +
L
fn
= 4
TM-J2000/J2100, TM-T90,
TM-P60:
TM-U220:
[Description] Transmits the setting value of the memory switch specified by
[Notes]
This function works both in user setting mode and during normal printer operation.
The printer transmits the "Header to NUL" data shown below:
Transmit data
Header
Identifier
Setting value
NUL
The value of the memory switch is transmitted from bit 8 to bit 1. 48 or 49 is transmitted for a bit of
Reserved.
See description of <Function 3> of this command for detail of memory switch.
See [Notes for the processing to transmit data] for description of the processing to transmit data.
Paper roll Customize commands
p p
GS ( E
L H
1D 28 45 02 00 04 a
2 0
29 40 69
× 256) = 2
p p
( = 2,
H L H
TM-L90:
a
= 8
a
= 2, 8
Hex
37H
21H
30H or 31H
00H
GS ( E
fn
a
4 a
= 0)
a
= 1, 2, 8
Decimal Data quantity
55 1 byte
33 1 byte
48 or 49 8 byte
0 1 byte
a .
Ver. 10.01 p. 585