Epson TM-T88III Programming Manual page 297

C O N F I D E N T I A L
TM-T88III
This command can be used in standard mode only.
The dot density and the maximum print area are described in the next tables (dpi: number of dots
per 25.4 mm).
"Vertical" is in the direction of paper feeding and "horizontal" is perpendicular to the direction of
paper feeding.
The maximum print area in the vertical direction is information used when graphics are printed
with the page mode selected (for the starting position specified with ESC T is "Upper right" or
"Lower left"). In this case, bit images rotated by 90 degrees or 270 degrees are printed.
Scaling Dot density Maximum print area (dot) Dot density
×
1
180 dpi
×
2
90dpi
Paper roll Bit-image commands
Vertical
831 180 dpi
415 90 dpi
GS v 0
Horizontal
Maximum print area (dot)
Paper width 80 mm
512
256
Paper width 58 mm
360
180
Ver. 10.01 p. 297