Label Id: Set Individually Per Symbology; Label Id Control - Datalogic Quickscan QD2200 Product Reference Manual

ENTER/EXIT PROGRAMMING MODE

Label ID: Set Individually Per Symbology

This feature configures a Label ID individually for a single symbology.

Label ID Control

This option controls whether a Label ID is disabled, or sent as a prefix or suffix for a
given symbology type.
$CIDCO00
Label ID Transmission = Enable as Prefix
$CIDCO02
42
QUICKSCAN™ I QD2200
NOTE: This setting requires the scanning of bar codes from multiple sec-
tions. See " Label ID: Set Individually Per Symbology" on page 162 for more
detailed programming instructions.

Label ID Transmission = Disable
$CIDCO01
Label ID Transmission = Enable as Suffix
DATA FORMAT