Standard 2 Of 5 Fixed Length 1 - Datalogic Magellan 8500 Product Reference Manual

Standard 2 of 5 Fixed Length 1

NOTE
6-274
This feature specifies Standard 2 of 5 first fixed length.
This applies when Standard 2 of 5 Length Control is set to
fixed-length decoding.
To set this feature:
1. Scan the SWITCH barcode.
2. Scan the barcode, SET STANDARD 2 OF 5 FIXED LENGTH 1
below. You'll need to cover any unused barcodes on this and the fac-
ing page to ensure that the scanner reads only the barcode you
intend to scan.
3. Scan the appropriate digits from the keypad in
resent the desired fixed label length. The selectable range for this
option is 1 to 50. Pad all single digit numbers with a leading zero to
yield a two-digit entry (01-50).
4. Complete the programming sequence by scanning the SWITCH
barcode.
SET STANDARD 2 OF 5 FIXED LENGTH 1
Appendix C
Magellan 8500 Scanner
®
that rep-