Emptying The Hole Punch Waste Container; Print Quality Maintenance - Xerox ColorQube 9303 User Manual

The waste tray will need to be emptied approximately 4 times per year or more depending on usage.
CAUTION: If you remove the waste ink tray you must always empty it before replacing it.

Emptying the Hole Punch Waste Container

The hole punch waste container is a catch
tray that collects the waste punched
paper. Your device will prompt you when
the hole punch waste container needs
emptying.
Detail instructions are provided on the
touch screen. Follow the instructions and
labels provided when emptying the
container.
• Slide the hole punch waste container
out of the finisher. Dispose of the
waste punched paper in the waste bin.
• Install the emptied hole punch waste container, ensuring that the container is inserted correctly.

Print Quality Maintenance

There are a number of tasks your device performs automatically to ensure it is running at optimum
print quality:
Automatic Print Quality Maintenance
Your device contains a sub-system that periodically monitors the quality of the image being put on the
drum. This system is known as the Ink On Drum (IOD) system. This system will automatically detect
and correct a number of parameters in order to maintain optimum print quality.
This maintenance routine is automatic and lasts for approximately 60 seconds. The device schedules
this maintenance during 'non use time' which is determined by the Intelligent Ready feature.
Cleaning Pages
If a problem occurs and ink residue remains in the system, the device will run blank sheets through the
paper path to clean the system. This procedure does not require any user intervention, but may take a
few minutes to perform. The cleaning pages will be directed to the top tray and should be discarded.
There are additional troubleshooting tasks which can be performed to fix image quality problems.
Refer to Image Quality Problems on page 320.
ColorQube™ 9301/9302/9303
General Care and Troubleshooting
General Care
313