Maintenance And Consumables; Cleaning Unit; Staple Cartridges And Hole Punch Waste; Print Quality Maintenance - Xerox ColorQube 9301 Quick Manual

®
Xerox ColorQube™ 9301/ 9302/ 9303

Maintenance and Consumables

Ink Sticks

1. Load Solid Ink Sticks in the Ink Loading area, up to
per color can be loaded while the device is running.
2. When loading Solid Ink Sticks, check that the
in the correct ink loading slot.
Waste Ink Tray
3. The Waste Ink Tray accumulates ink debris resulting from printhead
maintenance.
4. The device will not work if the
empty the Tray. The waste ink is
through your normal refuse collection.

Cleaning Unit

5. The Cleaning Unit applies a Silicone Oil release agent to the print
drum.
6. Replace the unit using the instructions provided on the touch screen
and recycle the old unit as directed on the packaging or by your
local Xerox Representative.
Staple Cartridges and Hole
Punch Waste
7. If your device is equipped with the
Finisher, you will be required to replace the
Cartridges when the device displays a message instructing you to do
so.
8. If your fi nisher has the optional
required to empty the Hole Punch Waste Container when prompted.
9. Detailed instructions are provided on the
More information
For more information, please refer to:
• User Guides
• http://www.support.xerox.com
XEROX®, XEROX and Design® and ColorQube® are trademarks of Xerox Corporation in the United States and/or other countries. ©
2010 Xerox Corporation. All rights reserved.
6 Solid Ink Sticks
correct color
Waste Ink Tray is full, you must
non-toxic and can be disposed of
Offi ce Finisher or High Volume
Staple Cartridge
Hole Punch Unit, you will also be
touch screen.
1
is loaded
3
5
Print Quality
Maintenance
There are a number of tasks which are performed
automatically
or
quality.
If a problem occurs the device may need to run
blank sheets
system. These pages will be directed to the top
tray and should be discarded.
For additional options in correcting image quality
access the
10. Press the
Tools
11. Select
12. Select
13. Select
correct problems.
by the device to maintain print
through the paper path to clean the
Tools section.
Machine Status button. Select the
tab.
Troubleshooting.
Fix Image Quality.
Light Lines, Smears or Advanced to