Debug Platform Forw-Tcam - Cisco Catalyst 3750 Metro Command Reference Manual

Appendix B Catalyst 3750 Metro Switch Debug Commands

debug platform forw-tcam

Use the debug platform forw-tcam privileged EXEC command to enable debugging of the forwarding
ternary content addressable memory (TCAM) manager. Use the no form of this command to disable
debugging.
Syntax Description
adjustment
allocate
audit
error
move
read
write
Defaults Debugging is disabled.
Command Modes Privileged EXEC
Command History Release
12.1(14)AX
Usage Guidelines If you do not specify a keyword, all forwarding TCAM manager debug messages are displayed.
The undebug platform forw-tcam command is the same as the no debug platform forw-tcam
command.
Related Commands Command
show debugging
OL-9645-10
debug platform forw-tcam [adjustment | allocate | audit | error | move | read | write]
no debug platform forw-tcam [adjustment | allocate | audit | error | move | read | write]
(Optional) Display TCAM manager-adjustment debug messages.
(Optional) Display TCAM manager-allocation debug messages.
(Optional) Display TCAM manager-audit debug messages.
(Optional) Display TCAM manager-error debug messages.
(Optional) Display TCAM manager-move debug messages.
(Optional) Display TCAM manager-read debug messages.
(Optional) Display TCAM manager-write debug messages.
Modification
This command was introduced.
Description
Displays information about the types of debugging that are enabled.
Catalyst 3750 Metro Switch Command Reference
debug platform forw-tcam
B-51