Debug Platform Forw-Tcam - Cisco Catalyst 2960 Command Reference Manual

debug platform forw-tcam

debug platform forw-tcam
Use the debug platform forw-tcam privileged EXEC command to enable debugging of the forwarding
ternary content addressable memory (TCAM) manager. Use the no form of this command to disable
debugging.
Syntax Description
adjustment
allocate
audit
error
move
read
write
Defaults Debugging is disabled.
Command Modes
Privileged EXEC
Command History Release
12.2(25)FX
Usage Guidelines
If you do not specify a keyword, all forwarding TCAM manager debug messages appear.
The undebug platform forw-tcam command is the same as the no debug platform forw-tcam
command.
Related Commands Command
show debugging
Catalyst 2960 Switch Command Reference
B-30
debug platform forw-tcam [adjustment | allocate | audit | error | move | read | write]
no debug platform forw-tcam [adjustment | allocate | audit | error | move | read | write]
(Optional) Display TCAM manager adjustment debug messages.
(Optional) Display TCAM manager allocation debug messages.
(Optional) Display TCAM manager audit messages.
(Optional) Display TCAM manager error messages.
(Optional) Display TCAM manager move messages.
(Optional) Display TCAM manager read messages.
(Optional) Display TCAM manager write messages.
Modification
This command was introduced.
Description
Displays information about the types of debugging that are enabled.
Appendix B Catalyst 2960 Switch Debug Commands
OL-8604-04