Lucent Technologies MERLIN LEGEND Release 6.0 System Planning Manual page 87

MERLIN LEGEND Communications System Release 6.0
System Planning 555-660-112
2 Control Unit Configuration
Numbering the System
and see the Network Reference for more information.
Before the system is renumbered, the AUDIX Voice Power channel assignments
should be deleted (through AUDIX Voice Power) for the extensions being
renumbered. When the renumbering for the system is complete, AUDIX Voice
Power channels for the renumbered extensions should be added.
Figures 2-2 through 2-4 list the extension numbers according to the three number-
ing plans: 2-digit, 3-digit, and Set Up Space. The numbers are arranged in blocks
according to the first digit. The type of equipment or feature they are assigned is
shown in the block. The shaded areas of the table indicate extension numbers
automatically assigned by the system. The unshaded areas indicate the extension
numbers available for reassignment. Use the appropriate plan-specific instruc-
tions that follow to mark Forms 2a and 2b with extension number assignments.
For detailed information about the numbering plans (including considerations,
constraints, and feature interactions that may affect selection), see the Feature
Reference.
NOTE: NOTE: NOTE:
If the system includes Call Management System (CMS), it assigns
extension numbers to agent splits. The CMS agent extension numbers
must be two digits. Therefore, use the 2-digit numbering plan for CMS. For
more information, see the CMS documentation.
Issue 1
February 1998
Page 2-32