Lucent Technologies MERLIN LEGEND Release 6.0 System Planning Manual page 28

MERLIN LEGEND Communications System Release 6.0
System Planning 555-660-112
Release 4.1 Enhancements
Night Service Group Line Assignment
Beginning with Release 4.1, a system manager can assign lines to Night Service
groups to control handling of after-hours calls received on individual lines. This
capability replaces the automatic assignment to Night Service groups of only
those lines that ring on the Night Service operator console. An outside line must
be assigned to a Night Service group to receive Night Service treatment.
With this enhancement, Night Service can be activated and deactivated on lines
that do not appear on operator consoles (for example, personal lines), and lines
appearing at operator positions can be excluded from Night Service.
Forward on Busy
Beginning with Release 4.1, the Forward, Follow Me, and Remote Call Forward
features are enhanced to remove the requirement that a call be ringing at an
extension before it can be forwarded. With the Forward on Busy enhancement, a
call to an extension with no available SA (System Access) or ICOM (Intercom)
buttons is forwarded immediately to the programmed destination, preventing the
caller from hearing a busy signal from the intended call recipient's extension.
Maintenance Testing for BRI Facilities that Are
Part of Multiline Hunt Groups (MLHGs)
Beginning with Release 4.1, the NI-1 BRI (National Integrated Services Digital
Network-1 Basic Rate Interface) Provisioning Test Tool is enhanced to include
testing for BRI facilities that are part of Multiline Hunt Groups (MLHGs).
The NI-1 BRI Provisioning Test Tool is used by Lucent Technologies maintenance
personnel on MERLIN LEGEND Communications Systems that include a 800
NI-BRI module. Technicians use the tool during system installation and
maintenance to test the functionality of the BRI lines and to report analyzed
results.
0
0
0
Issue 1
February 1998
Page xxviii