Preparation; Adding To The System - Lucent Technologies MERLIN LEGEND Release 6.0 System Planning Manual

MERLIN LEGEND Communications System Release 6.0
System Planning 555-660-112
6 Modifications

Preparation

Preparation
To prepare for modifying the system:
1. Collect the package of completed planning forms. Although you may need
to revise only one or two forms, you should have all completed forms
available for reference. If you need clean copies of the forms, see
Appendix B of the Equipment and Operations Reference .
2. Review Chapter 1, "Before You Begin," for details on preparation for
planning activities.
3. Before revising the forms, analyze and document the changes planned.
For example:
4. Review security information in Appendix A, "Customer Support
Information," for details on how to minimize the risk of toll fraud.

Adding to the System

Adding to the system is defined as increasing its capacity or capability. This
increase may mean adding more or different kinds of lines/trunks, connecting
auxiliary equipment, or installing more telephones, consoles, or T/R equipment.
Forms Needed
Form 1, System Planning
Form 2a, System Numbering: Extension Jacks
Form 2c, System Numbering: Line/Trunk Jacks
Planning Form Instructions
1. Determine the specific type of line/trunk, auxiliary equipment, or
telephones to be added. Use Table 6-1 to determine the type of line/trunk
and/or extension module needed to support what you plan to add.
If adding extensions to the system, revise the floor plan to show the
location of the new telephones and the kind of equipment to be
used.
If activating a feature such as System Speed Dial, survey
employees to identify the numbers that should be programmed into
the speed dial file.
6
6
Issue 1
February 1998
Page 6-2
6
6