Lucent Technologies MERLIN LEGEND Release 6.0 System Planning Manual page 182

MERLIN LEGEND Communications System Release 6.0
System Planning 555-660-112
4 Features
Group-Assigned Features
The system automatically reserves extension numbers 793 through 799 for
paging groups. Extension 799 is the Page All group. Decide whether to keep or to
reassign the factory-set extension numbers. Keep in mind that you can provide
one-touch use of Group Paging to operators with DSSs if you renumber to
extensions within the Page 1, 2, or 3 button ranges or set the Page 1, 2, or 3
buttons so the operators can access them.
Planning Form Instructions
1. Determine the number of paging groups needed.
2. For each group, write the name of the group, such as
ID space on Form 7b.
3. To change the factory-set extension numbers:
a.
b.
4. Write the extension number for each group member in the Ext. No. column
(see Form 2a).
5. Write each group member's name or location in the Person or Location
column (see Form 2a).
Coverage
Coverage allows calls to extensions (called senders ) to be covered by one or
more other extensions (called receivers ). Coverage can be individual or group-
assigned. This section contains instructions for both types (see "Call Restriction"
earlier in this chapter for more information).
Forms Needed
Form 2a, System Numbering: Extension Jacks
Form 4b, Analog Multiline Telephone
Form 4d, MLX Telephone
Form 5a, Direct-Line Console (DLC): Analog
Form 5b, Direct-Line Console (DLC): Digital
Form 6a, Optional Operator Features
Form 8a, System Features
Write the new numbers in the Renumber to space.
On Form 2d, System Numbering: Special Renumbers, write the new
numbers in the Renumber to column of the Group Paging section of
that form.
Sales
, in the Group
4
Issue 1
February 1998
Page 4-25
4
4