Lucent Technologies MERLIN LEGEND Release 6.0 System Planning Manual page 192

MERLIN LEGEND Communications System Release 6.0
System Planning 555-660-112
4 Features
Group-Assigned Features
3. Under the Primary Delay Announcement heading, do one of the following:
4. Under the Secondary Delay Announcement heading, do one of the
following:
5. To designate a telephone to receive message-waiting indications for the
group, do one of the following under the Message-Waiting Receiver
heading on Form 7d (page 2):
If there are no announcement devices, check the No box and
proceed to Step 4.
To designate one or more announcement devices, check the second
box and write the extension numbers for the devices in the space
provided (see Form 2a or 2b).
If there is no secondary announcement device, check the No box
and proceed to Step 5.
To designate a secondary announcement device, check the second
box and write the extension number for the device in the space
provided (see Form 2a or 2b). Also do the following:
— Write in the desired Delay Interval between the primary
announcement and the secondary announcement in
seconds. The Delay interval is also the time between repeats
of the Secondary Announcement, if the Repeat
Announcement option is set.
NOTE:
As a rule the Delay Interval should never be set less than the length
(in seconds) of the secondary announcement. Ideally, the Delay
Interval should be a multiple of the secondary announcement's
length, based on the anticipated number of calls in the queue. For
example, if the secondary announcement length is 10 seconds and
five calls are expected to be in the queue during busy times, then the
Delay Interval should be 50 seconds. For more information on opti-
mizing the settings for announcements, see the Feature Reference .
— If you want the secondary announcement to repeat
continuously after the Announcement Delay Interval, then
check the Yes box next to Repeat Announcement. Otherwise
check the No box.
To assign no receiver, check the No box.
To assign a receiver, check the second box and write the extension
number of the message-waiting receiver (see Form 2a).
Issue 1
February 1998
Page 4-35