Lucent Technologies MERLIN LEGEND Release 6.0 System Planning Manual page 162

MERLIN LEGEND Communications System Release 6.0
System Planning 555-660-112
4 Features
Telephone and Extension Features
NOTE: NOTE: NOTE:
Setting this option to Outward Restrict or Toll Restrict does not allow
reliable toll restriction on telephone company lines/trunks that do not
require 1 or 0 for toll calls. The Toll Type setting of 1 or 0 allows the system
to classify calls as either local or toll, based on the number a user dials.
Dialing a prefix depends on local telephone company requirements and the
type of trunk being used. The system must be programmed to designate
whether or not to restrict users from dialing calls to certain areas. The Toll
Type feature does not apply to tie trunks or DID trunks.
To restrict the extension from making outside calls so only intercom calls can be
made, check the Outward Restriction column.
To restrict the extension from making toll calls so only intercom and local calls can
be made, check the Toll Restriction column.
Forced Account Code Entry
This section contains instructions for setting up the system to associate calls with
corresponding accounts, clients, or projects for billing and accounting purposes.
Planning Form Instructions
Use Form 6b to identify extensions requiring forced Account Code Entry. Under
the Forced Account Code Entry heading on Form 6b, do one of the following:
To allow users to make calls without entering an account code, check the
No (factory setting) box.
To require users to enter an account code, check the Yes box.
4
Issue 1
February 1998
Page 4-5
4