Mac Notification Settings - D-Link xStack DGS-3600 User Manual

MAC Notification Settings

MAC Notification is used to monitor MAC addresses learned and entered
into the forwarding database. To globally set MAC notification on the
Switch, open the following window by opening the MAC Notification
Settings in the Administration folder.
Global Settings
The following parameters may be viewed and modified:
Parameter Description
State Enable or disable MAC notification globally on the
Switch
Interval The time in seconds between notifications.
(sec)
History The maximum number of entries listed in the history
Size log used for notification. Up to 500 entries can be
specified.
Port Settings
To change MAC notification settings for a port or group of ports on the
Switch, configure the following parameters.
Parameter Description
From...To Select a port or group of ports to enable for MAC
notification using the pull-down menus.
State Enable MAC Notification for the ports selected using
the pull-down menu.
Click Apply to implement changes made.
xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch
Figure 6- 16. MAC Notification Settings
42