Table of Contents
Advertisement
Removing and Installing the Processor Air Duct
Always operate your server system with the processor air duct in place. The air duct is
required for proper airflow within the server system.
For instructions on adding or replacing a processor, see
Processor" on page
installing your processor and heatsink.
Removing the Processor Air Duct
To remove the processor air duct, follow these steps:
1. Remove the PCI riser assembly. For instructions, see
Assembly" on page
2. Lift the processor air duct from its location over the two processor sockets.
56
59. Return to these instructions to reinstall the processor air duct after
50.
Figure 38. Removing the Processor Air Duct
®
Intel
Server System SR2600UR/SR2625UR Service Guide
"Installing or Replacing the
"Removing the PCI Riser
AF002956
Advertisement
Table of Contents
Need help?
Do you have a question about the SR2625UR - Server System - 0 MB RAM and is the answer not in the manual?