Installing the Server Board
To install the server board, follow these steps:
1. Place the server board into the server system (see letter "A" in
2. Attach the server board with nine screws (see letter "B" in
3. Connect all power cables to the server board.
4. Install memory. For instructions, see
5. Install the processor(s). For instructions, see
6. Install processor heatsink(s). For instructions, see
page
7. Install the fan module assembly. For instructions, see
page
8. Install the large air baffle. For instructions, see
page
9. Install the bridge board. For instructions, see step 6 in
Board" on page
®
Intel
Server System SR2600UR/SR2625UR Service Guide
A
Figure 110. Installing the Server Board
62.
128.
70.
105.
Figure
B
"Installing DIMMs" on page
"Installing the Processor" on page
"Installing the Heatsink" on
"Replacing a Fan Module" on
"Installing the Large Air Baffle" on
"Installing the Midplane
Figure
110).
110).
AF002981
57.
60.
117