Figure 84. Installing The 2.5-Inch Fixed Hdd Assembly - Intel SR2625UR - Server System - 0 MB RAM Service Manual

4. Slide the drive tray containing the installed 2.5-inch hard disk drives into the
system until it clicks into place as shown in
5. Connect one end of the power cable to the SAS/SATA connector on the back side of
the backplane (see letter "A" in
6. Connect the other end of the power cable to the two hard disk drives (see letter "B"
in
7. Connect one end of the data cables to the SATA connectors on the server board (see
letter "C" in
card.
®
Intel Server System SR2600UR/SR2625UR Service Guide
B
A

Figure 84. Installing the 2.5-inch fixed HDD assembly

Figure 85).
Figure 85) or SAS/SATA connectors on the SAS/SATA add-in PCI
Figure 84.
Figure 85).
AF003037
93