Intel SR2625UR - Server System - 0 MB RAM Service Manual page 120

6. Connect the opposite end of the cable to the RMM3 connector on the server board
(see letter "A" in
7. Attach the module bracket to the chassis with two screws (see letter "B" in
Figure
Note: The screws install from the back of the chassis.
8. Install the processor air duct. For instructions, see
Duct" on page
9. Install the PCI riser assembly into the server system. For instructions, see
"Installing the PCI Riser Assembly" on page
100
Figure 92. Connecting the Intel
Figure 93).
93).
Figure 93. Installing the Intel
57.
Intel
AF002949
®
RMM3 cable
A
®
RMM3 to the Server System
"Installing the Processor Air
51.
®
Server System SR2600UR/SR2625UR Service Guide
B
AF003009