Rmm3 - Intel SR2625UR - Server System - 0 MB RAM Service Manual

Removing the Intel
To remove the Intel
1. Remove the PCI riser assembly. For instructions, see
Assembly" on page
2. Remove the processor air duct. For instructions, see
Duct" on page
3. Remove screws from the back of the chassis (see letter "A" in
4. Disconnect the Intel
in
Figure
®
Intel Server System SR2600UR/SR2625UR Service Guide
®

RMM3

®
Remote Management Module 3, follow these steps:
50.
56.
®
RMM3 from the connector on the server board (see letter "B"
Figure 94) and remove the module out of the server system (see letter "C" in
94).
Figure 94. Removing Intel
"Removing the PCI Riser
"Removing the Processor Air
C
B
®
RMM3 from the Server System
Figure 94).
A
AF003010
101