Installing The Server System Cover; Removing And Installing The Processor Air Duct; Figure 12. Installing The Server System Cover - Intel SR1695GPRX Service Manual

Installing the Server System Cover

1. Observe the safety and ESD precautions at the beginning of this book. See
Information".
2. Place the cover over the server system so that the side edges of the cover sit just
inside the server system sidewalls. Slide the cover forward (see letter "A" in
Figure
3. Tighten the screw at the rear of the server (see letter "B") and install the top cover
screw (see letter "C").

Removing and Installing the Processor Air Duct

The system requires the use of an air duct to direct airflow and sustain appropriate air
pressure. Always operate your server system with the air duct in place. The air duct is
required for proper airflow within the server system.
®
Intel Server System SR1695GPRX Service Guide
12).

Figure 12. Installing the Server System Cover

C
"Safety
B
A
EP0005
29