Installing A Hard Disk Drive Into 2.5" Hard Drive Carrier; Figure 50. Installing Hard Disk Drive - Inserting 3.5" Hdd Assembly; Figure 51. Installing Hard Disk Drive - Removing 2.5" Hdd Carrier; Figure 52. Installing Hard Disk Drive - Removing Plastic Drive Blank - Intel R2000BB Series Service Manual

Hardware Installations and Upgrades
4. With the lever open, insert the hard disk drive assembly into the chassis (see letter "E"). Push in
the lever to lock it into place (see letter "F").
Figure 50. Installing Hard Disk Drive – Inserting 3.5" HDD assembly

Installing a Hard Disk Drive into 2.5" Hard Drive Carrier

1. Remove the drive carrier by pressing the green latch to unlock (see letter "A"). Pull out the
black lever and slide the carrier out (see letter "B").
Figure 51. Installing Hard Disk Drive – Removing 2.5" HDD carrier
2. Remove the four screws securing the plastic drive blank from the 2.5" HDD carrier (see letter
"C"). Disengage the plastic drive blank from the HDD carrier. Remove the plastic drive blank
from the 2.5" HDD carrier (see letter "D").
Figure 52. Installing Hard Disk Drive – Removing plastic drive blank
3. Install the hard disk drive using the four screws as shown. Make sure the connector end of the
drive matches the backplane connector (see letter "E").
36
®
Intel Server System R2000BB Service Guide