Route Capacity Configuration; Route Capacity Configuration Overview; Introduction - 3Com 5500-EI PWR Install Manual

6

Route Capacity Configuration

When configuring route capacity, go to these sections for information you are interested in:

Route Capacity Configuration Overview

Route Capacity Limitation Configuration
Displaying and Maintaining Route Capacity Limitation Configuration
The term router in this chapter refers to a router in a generic sense or an Ethernet switch running a
routing protocol.
Route Capacity Configuration Overview

Introduction

In practical networking applications, there are a large number of routes, especially OSPF routes, in the
routing table. Normally, routing information is stored in the memory of the switch. While the size of the
routing table increases, the total memory of the switch remains unchanged unless the hardware is
upgraded. However, upgrading may not always solve the problem.
To solve this problem, the switches provide a mechanism to control the size of the routing table; that is,
monitoring the free memory in the system to determine whether to add new routes to the routing table
and whether to keep the connection of a routing protocol.
Normally, the default configuration of the system can meet the requirements. To avoid decreasing
system stability and availability due to improper configuration, it is not recommended to modify the
configuration.
6-1