3Com 5500-EI PWR Install Manual page 544

Network diagram
Figure 1-6 Network diagram for VRRP port tracking configuration
Vlan-int3
10.100.10. 2/24
Virtual IP address
202.38.160.111/24
Actual IP address
Vlan-int2
202.38.160. 1/24
Configuration procedure
Configure the master switch.
# Enter system view.
<Sysname> system-view
# Create VLAN 3.
[Sysname] vlan 3
[Sysname-vlan3] port Ethernet1/0/1
[Sysname-vlan3] quit
# Configure VLAN-interface 3.
[Sysname] interface Vlan-interface 3
[Sysname-Vlan-interface3] ip address 10.100.10.2 255.255.255.0
[Sysname-Vlan-interface3] quit
# Create VLAN 2.
[Sysname] vlan 2
[Sysname-vlan2] port Ethernet1/0/2
[Sysname-vlan2] quit
# Configure VLAN-interface 2.
[Sysname] interface Vlan-interface 2
[Sysname-Vlan-interface2] ip address 202.38.160.1 255.255.255.0
[Sysname-Vlan-interface2] quit
# Create a VRRP group.
[Sysname] interface Vlan-interface 2
[Sysname-Vlan-interface2] vrrp vrid 1 virtual-ip 202.38.160.111
# Enter Ethernet 1/0/1 port view and enable the VRRP tracking function.
Network
Master
Layer 2 Switch
Backup
Virtual IP address
202.38.160.111/24
Actual IP address
Vlan-int2
202.38.160.2/24
1-17