How Msdp Works - 3Com 5500-EI PWR Install Manual

MSDP achieves this objective. By establishing MSDP peer relationships among RPs of different
PIM-SM domains, source active (SA) messages can be forwarded among domains and the multicast
source information can be shared.
MSDP is applicable only if the intra-domain multicast protocol is PIM-SM.
MSDP is meaningful only for the any-source multicast (ASM) model.

How MSDP Works

MSDP peers
With one or more pairs of MSDP peers configured in the network, an MSDP interconnection map is
formed, where the RPs of different PIM-SM domains are interconnected in series. Relayed by these
MSDP peers, an SA message sent by an RP can be delivered to all other RPs.
Figure 5-1 Where MSDP peers are in the network
As shown in Figure
PIM-SM routers that assume different roles function differently.
1) MSDP peers on RPs
Source-side MSDP peer: the MSDP peer nearest to the multicast source (Source), typically the
source-side RP, like RP 1. The source-side RP creates SA messages and sends the messages to
its remote MSDP peer to notify the MSDP peer of the locally registered multicast source
information. A source-side MSDP must be created on the source-side RP; otherwise it will not be
able to advertise the multicast source information out of the PIM-SM domain.
Receiver-side MSDP peer: the MSDP peer nearest to the receivers, typically the source-side RP,
like RP 3. Upon receiving an SA message, the receiver-side MSDP peer resolves the multicast
source information carried in the message and joins the SPT rooted at the source across the
PIM-SM domain. When multicast data from the multicast source arrives, the receiver-side MSDP
peer forwards the data to the receivers along the RPT.
5-1, an MSDP peer can be created on any PIM-SM router. MSDP peers created on
2