3Com 5500-EI PWR Install Manual page 31

To do...
Set the authentication
password for the local user
Specify the service type for
AUX users
Quit to system view
Enter AUX user interface view
Configure to authenticate
users locally or remotely
Set the baud
rate
Set the check
mode
Configure
the console
port
Set the stop
bits
Set the data
bits
Configure the command level
available to users logging in to
the user interface
Make terminal services
available to the user interface
Set the maximum number of
lines the screen can contain
Set history command buffer
size
Use the command...
password { simple | cipher }
password
service-type terminal [ level
level ]
quit
user-interface aux 0
authentication-mode
scheme [ command-
authorization ]
speed speed-value
parity { even | none | odd }
stopbits { 1 | 1.5 | 2 }
databits { 7 | 8 }
user privilege level level
shell
screen-length screen-length
history-command max-size
value
2-11
Remarks
Required
Required
—
—
Required
The specified AAA scheme
determines whether to
authenticate users locally or
remotely.
By default, users logging in
through the console port (AUX
user interface) are not
authenticated.
Optional
The default baud rate of the AUX
port (also the console port) is
19,200 bps.
Optional
By default, the check mode of a
console port is set to none, that
is, no check bit.
Optional
The default stop bits of a console
port is 1.
Optional
The default data bits of a console
port is 8.
Optional
By default, commands of level 3
are available to users logging in to
the AUX user interface.
Optional
By default, terminal services are
available in all user interfaces.
Optional
By default, the screen can contain
up to 24 lines.
You can use the screen-length 0
command to disable the function
to display information in pages.
Optional
The default history command
buffer size is 10. That is, a history
command buffer can store up to
10 commands by default.