Configuring A Description For An Aggregation Group; Displaying And Maintaining Link Aggregation Configuration - 3Com 5500-EI PWR Install Manual

To do...
Configure the port priority
Changing the system priority may affect the priority relationship between the aggregation peers, and
thus affect the selected/unselected status of member ports in the dynamic aggregation group.

Configuring a Description for an Aggregation Group

To do...
Enter system view
Configure a description for an
aggregation group
If you have saved the current configuration with the save command, after system reboot, the
configuration concerning manual and static aggregation groups and their descriptions still exists, but
that of dynamic aggregation groups and their descriptions gets lost.

Displaying and Maintaining Link Aggregation Configuration

To do...
Display summary information of
all aggregation groups
Display detailed information of
a specific aggregation group or
all aggregation groups
Display link aggregation details
of a specified port or port range
Display local device ID
Clear LACP statistics about a
specified port or port range
Use the command...
lacp port-priority
port-priority
Use the command...
system-view
link-aggregation group agg-id
description agg-name
Use the command...
display link-aggregation summary
display link-aggregation verbose
[ agg-id ]
display link-aggregation interface
interface-type interface-number [ to
interface-type interface-number ]
display lacp system-id
reset lacp statistics [ interface
interface-type interface-number [ to
interface-type interface-number ] ]
1-9
Remarks
Optional
By default, the port priority is
32,768.
Remarks
—
Optional
By default, no description is
configured for an aggregation
group.
Remarks
Available in any
view
Available in user
view