Configuring The Voice Vlan To Operate In Manual Voice Vlan Assignment Mode - 3Com 5500-EI PWR Install Manual

Configuring the Voice VLAN to Operate in Manual Voice VLAN Assignment
Mode
Follow these steps to configure a voice VLAN to operate in manual voice VLAN assignment mode:
Enter system view
Set an OUI address that can be identified
by the voice VLAN
Enable the voice VLAN security mode
Set the voice VLAN aging timer
Enable the voice VLAN function globally
Enter port view
Enable voice VLAN on a port
Set the CoS precedence and DSCP
precedence for voice traffic
Enable the voice VLAN legacy function on
the port
Set voice VLAN assignment mode on a
port to manual
Quit to system view
Add a
Access
port in
port
manual
voice
VLAN
Trunk or
assignm
Hybrid
ent
port
mode to
the
voice
VLAN
To do...
Enter VLAN view
Add the port to the
VLAN
Enter port view
Add the port to the
VLAN
Use the command...
system-view
voice vlan mac-address
oui mask oui-mask
[ description text ]
voice vlan security enable
voice vlan aging minutes
voice vlan vlan-id enable
interface interface-type
interface-number
voice vlan enable
voice vlan qos { cos-value
dscp-value | trust }
voice vlan legacy
undo voice vlan mode
auto
quit
vlan vlan-id
port interface-list
interface interface-type
interface-num
port trunk permit vlan
vlan-id
port hybrid vlan vlan-id
{ tagged | untagged }
1-9
Remarks
—
Optional
Without this address,
the default OUI
address is used.
Optional
By default, the voice
VLAN security mode is
enabled.
Optional
The default aging timer
is 1,440 minutes.
Required
Required
Required
By default, voice VLAN
is disabled on a port.
Optional
By default, voice VLAN
sets the CoS
precedence to 6 and
DSCP precedence to
46 for voice traffic
automatically.
Optional
By default, voice VLAN
legacy is disabled.
Required
The default voice
VLAN assignment
mode on a port is
automatic.
—
Required
By default, all the ports
belong to VLAN 1.