Displaying And Maintaining Cluster Configuration - 3Com 5500-EI PWR Install Manual

Configuring cluster device blacklist
Follow these steps to configure the cluster device blacklist on a management device:
To do...
Enter system view
Enter cluster view
Add the MAC address of a
specified device to the cluster
blacklist
Delete the specified MAC
address from the cluster
blacklist
Delete a device from the cluster
add this device to the cluster
blacklist
Displays the information about
the devices in the cluster
blacklist

Displaying and Maintaining Cluster Configuration

Display all NDP configuration and running
information (including the interval to send
NDP packets, the holdtime, and all
neighbors discovered)
Display NDP configuration and running
information on specified ports (including
the neighbors discovered by NDP on the
ports)
Display global NTDP information
Display device information collected by
NTDP
Display status and statistics information
about the cluster
Display information about the candidate
devices of the cluster
Display information about the member
devices of the cluster
Clear the statistics on NDP ports
Use the command...
system-view
cluster
black-list add-mac
mac-address
black-list delete-mac
mac-address
delete-member member-id
[ to-black-list ]
display cluster black-list
To do... Use the command...
display ndp
display ndp interface port-list
display ntdp
display ntdp device-list [ verbose ]
display cluster
display cluster candidates
[ mac-address H-H-H | verbose ]
display cluster members
[ member-number | verbose ]
reset ndp statistics [ interface
port-list ]
1-18
Remarks
—
—
Optional
By default, the cluster blacklist
is empty.
Optional
Optional
Optional
This command can be
executed in any view.
Remarks
Available in
any view.
Available in
user view.