3Com 5500-EI PWR Install Manual page 987

To do...
Enable history record
Configure the retaining
time of history record
Configure statistics
interval and the
maximum number of
retained statistics
information
Configure the retaining
time of statistics
information
Configure test start
time and lifetime
Enable routing table
bypass
Set the maximum
number of concurrent
tests
Configure the probe
timeout time
Start the test
Display test results
3) Configuring FTP test on remote-ping client
Follow these steps to configure FTP test on remote-ping client:
To do...
Enter system view
Enable the remote-ping
client function
Create a remote-ping
test group and enter its
view
Configure the
destination IP address
Use the command...
history-record enable
history keep-time keep-time
statistics { interval interval |
max-group number }
statistics keep-time
keep-time
test-time begin { hh:mm :ss
[ yyyy/mm/dd ] | now } lifetime
lifetime
sendpacket passroute
remote-ping-agent
max-requests number
timeout time
test-enable
display remote-ping results
[ admin-name operation-tag ]
Use the command...
system-view
remote-ping-agent enable
remote-ping
administrator-name
operation-tag
destination-ip ip-address
1-8
Remarks
Optional
By default, history record is not enabled.
Optional
By default, the retaining time of history
record is 120 minutes.
Optional
By default, statistics interval is 120
minutes and up to two pieces of statistics
information can be retained.
Optional
By default, the retaining time of statistics
information is 120 minutes.
Optional
By default, no test start time and lifetime
is configured.
Optional
By default, routing table bypass is
disabled.
Optional
By default, five concurrent tests are
allowed.
Optional
By default, a probe times out in three
seconds.
Required
Required
You can execute the command in any
view.
Remarks
—
Required
By default, the remote-ping client
function is disabled.
Required
By default, no test group is configured.
Required
By default, no destination address is
configured.